Cable key |
|
A 4mm cable
is needed. |
|
A 4mm/Low profile cable
can be used. |
Conductive rubber is a fascinating substance and has revolutionised e-stim cock play. Each conductive rubber loop is soft and flexible and very easy to use and unlike metal spring loops the conductive rubber doesn't have issues with painful 'hotspots'. Since the rubber is flexible it is also able to cope with the various stages of erection and the various diameters of a mans appendage.
In use the loop fits over the shaft of the penis and is then gently tightened. A connection plug is then inserted into the end of the loop (one per loop!!) and connected to an e-stim power unit, and then the fun can begin.
Our loops are supplied as a pair and available in two different thicknesses, based on the connecting plug sizes. If you are looking for a thinner option then try our 2mm/TENS Conductive Rubber Loops
No Hot Spots
Our Conductive Rubber Loops have no metal sections and the plug is connected directly into one end of the conductive rubber loop, maximising the transfer of current.
Conductive Gel
We recommend the use of our water based Conductive Gel with our conductive rubber loops as it will improve the contact and sensation.
Specification
Name |
4mm Conductive Rubber Loops |
Length |
2 x 25cm (10") |
Maximum diameter |
65mm (2 1/2") |
Minimum diameter |
12mm (1/2") |
Thickness |
6mm |
Connection |
4mm Plug |
Instructions
Watch out for...
Ensure you connected one plug into each loop, not two plugs into one loop. As conductive rubber loops are classed as monopole electrodes you need two of them to work together, that is why we supply them as a pair.